What Does the UE Error Mean?
The LG washer UE error code indicates an unbalanced load problem. This means the washer has detected that the laundry inside the drum is unevenly distributed during the spin cycle.
When the load becomes unbalanced, the washer may stop spinning, slow down, or display the UE error code to prevent excessive vibration or possible damage.
Common Causes of the LG UE Error
Several issues can trigger the UE error code, including:
- Unevenly distributed laundry
- Overloaded washer
- Washing a single heavy item
- Washer not level on the floor
- Suspension or balance problems
- Worn shock absorbers
- Excessive vibration during spin cycle
How To Fix LG Washer UE Error
Follow these troubleshooting steps to help diagnose and fix the UE error code.
1. Pause the Washer
Stop the current cycle and allow the drum to stop spinning completely.
2. Redistribute the Laundry
Open the washer and evenly distribute the clothing inside the drum.
Avoid:
- washing a single heavy blanket alone
- tightly packed loads
- overloaded wash cycles
3. Remove Excess Items
If the washer is overloaded, remove some clothing and restart the cycle.
4. Check Washer Leveling
Make sure the washer is sitting level on the floor.
An unlevel washer can cause repeated balance problems during spinning.
5. Inspect the Floor Surface
Soft or uneven flooring may increase vibration and trigger the UE error.
6. Restart the Spin Cycle
After redistributing the load:
- close the door
- restart the spin cycle
- monitor for proper operation
How To Reset LG Washer After UE Error
You can often reset the washer using these steps:
- Turn off the washer.
- Unplug the washer from power.
- Wait approximately 5 minutes.
- Plug the washer back in.
- Restart the wash or spin cycle.
Some LG washer models may use slightly different reset procedures.
Frequently Asked Questions
What does UE mean on an LG washer?
The UE error code indicates the washer has detected an unbalanced load during the spin cycle.
Can overloading the washer cause the UE error?
Yes. Overloading is one of the most common causes of the UE error code.
Why does my LG washer keep going off balance?
Possible causes include uneven laundry distribution, unlevel flooring, overloaded loads, or worn suspension components.
Will the UE error go away on its own?
Sometimes. Redistributing the laundry and restarting the cycle may resolve the issue.
Can a bad suspension system cause the UE error?
Yes. Worn suspension rods or shock absorbers can contribute to excessive vibration and balance problems.