Maytag Washer F20 Water Problem

What Does the F20 Error Mean?

The Maytag washer F20 error code indicates a water supply problem. This means the washer is not receiving enough water or is taking too long to fill during the wash cycle.

In many cases, the washer will stop operation and display the F20 code when the required water level is not reached within the expected time.

Common Causes of the Maytag F20 Error

Several issues can trigger the F20 error code, including:

  • Water supply valves turned off
  • Low household water pressure
  • Kinked or blocked water inlet hoses
  • Clogged inlet filter screens
  • Faulty water inlet valve
  • Frozen water lines
  • Wiring or control board problems

How To Fix Maytag Washer F20 Error

Follow these troubleshooting steps to help diagnose and fix the F20 error code.

1. Check the Water Supply

Make sure both hot and cold water supply valves are fully open.

2. Inspect the Water Hoses

Check the inlet hoses for:

  • kinks
  • bends
  • pinched sections
  • leaks

Straighten or replace damaged hoses if necessary.

3. Clean the Inlet Filter Screens

Turn off the water supply and disconnect the hoses.

Inspect the small inlet screens for:

  • sediment
  • mineral buildup
  • debris

Clean the screens carefully before reconnecting the hoses.

4. Check Household Water Pressure

Low water pressure can prevent the washer from filling correctly.

Verify that nearby faucets have normal water flow.

5. Inspect the Water Inlet Valve

If the washer still does not fill properly, the inlet valve may be defective and require replacement.

6. Run a Test Cycle

Reconnect power and run a short wash cycle to determine whether the error returns.

How To Reset Maytag Washer After F20 Error

You can often reset the washer using these steps:

  1. Turn off the washer.
  2. Unplug the washer from power.
  3. Wait approximately 5 minutes.
  4. Plug the washer back in.
  5. Start a short wash cycle.

Some Maytag washer models may use slightly different reset procedures.

Frequently Asked Questions

What does F20 mean on a Maytag washer?

The F20 error code usually indicates a water supply or water fill problem.

Can low water pressure cause the F20 error?

Yes. Low household water pressure is one of the most common causes of the F20 error.

Can clogged inlet screens trigger the F20 code?

Yes. Sediment or mineral buildup in the inlet screens can restrict water flow and trigger the error.

Will unplugging the washer clear the F20 error?

Sometimes. However, if the water supply problem remains, the error will likely return.

Is the F20 error expensive to repair?

Many F20 problems can be fixed by cleaning inlet screens or correcting water supply issues. Replacing the inlet valve may increase repair costs.

Related Maytag Washer Error Codes