What Does the UE Error Mean?
The Kenmore washer UE error code indicates an unbalanced load condition. This means the washer has detected that the laundry inside the drum is unevenly distributed during the spin cycle.
To prevent excessive vibration, noise, and possible damage, the washer may stop spinning and display the UE error code.
Common Causes of the Kenmore UE Error
Several issues can trigger the UE error code, including:
- Unevenly distributed laundry
- Washing a single heavy item
- Overloaded washer
- Underloaded washer
- Washer not level on the floor
- Worn suspension components
- Damaged shock absorbers or suspension rods
How To Fix Kenmore Washer UE Error
Follow these troubleshooting steps to help resolve the UE error code.
1. Pause the Washer
Stop the cycle and allow the washer drum to come to a complete stop.
2. Redistribute the Load
Open the lid or door and rearrange the laundry evenly around the drum.
Large items such as:
- blankets
- comforters
- rugs
- towels
can easily become unbalanced during spinning.
3. Remove Excess Items
If the washer is overloaded, remove some clothing and try again.
4. Add Additional Items if Necessary
Very small loads can also create balance problems.
Adding a few similar items may help distribute weight more evenly.
5. Check Washer Level
Use a level to verify the washer is sitting evenly on the floor.
Adjust the leveling feet if necessary.
6. Run a Spin Cycle
Restart the washer and run a spin cycle to determine whether the error returns.
Persistent UE errors may indicate worn suspension components.
How To Reset Kenmore Washer After UE Error
You can often reset the washer using these steps:
- Turn off the washer.
- Open the lid or door.
- Redistribute the laundry.
- Close the lid securely.
- Restart the spin cycle.
If necessary:
- Unplug the washer.
- Wait approximately 5 minutes.
- Plug the washer back in.
- Restart the cycle.
Frequently Asked Questions
What does UE mean on a Kenmore washer?
The UE error code usually indicates an unbalanced load during the spin cycle.
Can one blanket cause the UE error?
Yes. Large items such as blankets and comforters are common causes of load imbalance.
Will unplugging the washer clear the UE error?
Sometimes. However, if the load remains unbalanced, the error will likely return.
Can an uneven floor cause the UE error?
Yes. A washer that is not properly leveled may repeatedly display unbalanced load errors.
Is the UE error expensive to repair?
Most UE errors can be corrected by redistributing the laundry. Mechanical repairs may only be needed if suspension components are worn or damaged.